Product Key Selling Points
• Winged outlet profile — the top guide-wing structure helps define airflow direction and provides a clearer installation reference than a plain flat outlet body.
• Adjustable air gap: 0.2 – 4.0 mm. The same air knife can be set for controlled surface cleaning, normal drying, or stronger water blow-off.
• Three inlet position options: air inlet from both ends, from the side, or from the bottom. This gives C-A flexibility for pipe routing and machine integration.
• Φ32 / Φ38 / Φ45 / Φ51 inlet options — suitable for different blower pipe sizes and airflow requirements.
• Factory-customizable length 50 – 4000 mm with High-Temp Silicone Gasket Seal (≤250°C) and full OEM/ODM support. Each unit can be built according to drawings, samples, or written equipment requirements.
Product Structure & Working Principle
• 50W × 100H mm aluminum alloy extrusion forms a balanced body with an integrated winged outlet section for airflow guidance and mounting reference.
• Air can enter from both ends, from the side, or from the bottom. The side and bottom inlet drawings show M8 threaded fixing positions for secure installation.
• The Φ32 / Φ38 / Φ45 / Φ51 inlet choices allow the air supply to match different pipe systems. For custom lengths from 50 – 4000 mm, the internal chamber distributes air before it reaches the outlet.
• The internal path guides air from the plenum into the winged outlet area, where the flow is accelerated into a controlled flat air sheet.
• The outlet edge size is adjustable from 0.2 – 4.0 mm. Operators can tune airflow intensity with the edge screws without disassembling the full air knife.
• High-Temp Silicone Gasket Seal (≤250°C) is used at the end sealing positions to reduce leakage and support stable operation in heated or continuous drying processes.
Application Scenarios
The C-A Winged Strong Air Knife is suitable for production lines that need directional airflow control, flexible inlet routing, and a compact 50×100H body.
• Surface Drying — bottles, machined parts, molded parts, and general components after washing, rinsing, or cooling.
• Flat Panel & Glass Processing — winged outlet guidance helps keep airflow direction stable across panels and glass surfaces.
• PCB Cleaning Lines — adjustable 0.2 – 4.0 mm edge gap helps control air impact for moisture removal and particle blow-off.
• Label & Coding Stations — controlled flat airflow helps dry the surface before printing, marking, or labeling.
• Wide-Format Production Lines — factory length customization from 50 – 4000 mm allows the air knife to match different conveyor and product widths.
• Heated Process Equipment — High-Temp Silicone Gasket Seal (≤250°C) supports use near drying tunnels, heat-assisted washing lines, and warm-air blow-off stations.
Technical Parameters
Specification Table:
Parameter | Specification |
Model | C-A Winged Strong Air Knife (Chinese model: C-A Dai Chi Bang Qiang Feng Dao) |
Cross-Section Size | 50W × 100H mm |
Main Material | Aluminium Alloy |
Air Inlet Position | End (Both Sides), Side (M8), Bottom (M8) |
Air Inlet Size | Φ32 / Φ38 / Φ45 / Φ51 |
Inlet Thread | M8 — visible on side and bottom inlet drawings |
Air Knife Edge Size | 0.2 – 4.0 mm (Adjustable) |
Customizable Length | 50 – 4000 mm |
End Sealing | High-Temp Silicone Gasket Seal (≤250°C) |
OEM / ODM | Supported |
Factory Capability · Customization · Service
• QXY processes the 50W × 100H mm aluminum alloy air knife body, winged outlet section, inlet ports, edge parts, and sealing surfaces with in-house CNC machining for controlled dimensional accuracy.
• Custom blade length is supported from 50 – 4000 mm. The air knife can be matched to conveyor width, product width, or equipment frame space.
• Configuration options include inlet position, inlet pipe diameter, air gap range, mounting method, and surface finish. End, side, and bottom inlet layouts can be selected according to pipe routing.
• OEM and ODM orders are accepted. Customers may provide drawings, samples, machine photos, or written application conditions for engineering confirmation.
• High-Temp Silicone Gasket Seal (≤250°C) is fitted as the standard end sealing solution, helping reduce leakage without requiring an extra sealing upgrade.
• Before shipment, each customized unit is checked by pressure test, edge-gap calibration, inlet-position inspection, and dimensional confirmation.
Competitive Advantage
Comparison Item | QXY C-A Winged Strong Air Knife | Standard Air Knife |
Winged Outlet Profile | Guide-wing outlet helps control airflow direction and installation reference | Flat outlet with less directional guidance |
Air Gap Adjustability | Adjustable 0.2–4mm ✓ | Fixed, not adjustable ✗ |
Inlet Positions | End, side, and bottom inlet layouts for flexible pipe routing | Usually one inlet layout or limited pipe direction |
Inlet Pipe Options | Φ32 / Φ38 / Φ45 / Φ51 for different blower pipe sizes | Fewer inlet diameter options |
Custom Length | Factory-customized 50 – 4000 mm for narrow or wide conveyor widths | Mostly standard lengths only |
Body Cross-Section | 50W × 100H mm body balances airflow capacity and installation size | General body profile may not match the machine space |
High-Temp Sealing | Silicone gasket ≤250°C ✓ | Standard rubber seal ✗ |
Customization | Length, gap, inlet position, inlet diameter, and surface finish can be specified | Limited configuration changes |
About Us & Custom Inquiry
Shenzhen Qixingyuan Machinery Equipment Co., Ltd.
We are a professional manufacturer focused on industrial air knife equipment, including aluminum alloy, stainless steel, and PVC air knives. Our product range also covers blowers, mounting hardware, and system accessories. With CNC precision machining, in-process quality controls, and verification before shipment, we supply air knife products for real production-line requirements.
We support OEM and ODM projects for electronics, automotive, food and beverage, pharmaceutical, and general manufacturing customers. Customers may send drawings, samples, application descriptions, or equipment photos. Our engineering team reviews airflow direction, installation space, and pipe routing, then provides a solution that integrates and performs as required.
Request a Custom Quote
We support customized air knife length, air gap, and airflow design according to your equipment requirements.
Product Key Selling Points
• Winged outlet profile — the top guide-wing structure helps define airflow direction and provides a clearer installation reference than a plain flat outlet body.
• Adjustable air gap: 0.2 – 4.0 mm. The same air knife can be set for controlled surface cleaning, normal drying, or stronger water blow-off.
• Three inlet position options: air inlet from both ends, from the side, or from the bottom. This gives C-A flexibility for pipe routing and machine integration.
• Φ32 / Φ38 / Φ45 / Φ51 inlet options — suitable for different blower pipe sizes and airflow requirements.
• Factory-customizable length 50 – 4000 mm with High-Temp Silicone Gasket Seal (≤250°C) and full OEM/ODM support. Each unit can be built according to drawings, samples, or written equipment requirements.
Product Structure & Working Principle
• 50W × 100H mm aluminum alloy extrusion forms a balanced body with an integrated winged outlet section for airflow guidance and mounting reference.
• Air can enter from both ends, from the side, or from the bottom. The side and bottom inlet drawings show M8 threaded fixing positions for secure installation.
• The Φ32 / Φ38 / Φ45 / Φ51 inlet choices allow the air supply to match different pipe systems. For custom lengths from 50 – 4000 mm, the internal chamber distributes air before it reaches the outlet.
• The internal path guides air from the plenum into the winged outlet area, where the flow is accelerated into a controlled flat air sheet.
• The outlet edge size is adjustable from 0.2 – 4.0 mm. Operators can tune airflow intensity with the edge screws without disassembling the full air knife.
• High-Temp Silicone Gasket Seal (≤250°C) is used at the end sealing positions to reduce leakage and support stable operation in heated or continuous drying processes.
Application Scenarios
The C-A Winged Strong Air Knife is suitable for production lines that need directional airflow control, flexible inlet routing, and a compact 50×100H body.
• Surface Drying — bottles, machined parts, molded parts, and general components after washing, rinsing, or cooling.
• Flat Panel & Glass Processing — winged outlet guidance helps keep airflow direction stable across panels and glass surfaces.
• PCB Cleaning Lines — adjustable 0.2 – 4.0 mm edge gap helps control air impact for moisture removal and particle blow-off.
• Label & Coding Stations — controlled flat airflow helps dry the surface before printing, marking, or labeling.
• Wide-Format Production Lines — factory length customization from 50 – 4000 mm allows the air knife to match different conveyor and product widths.
• Heated Process Equipment — High-Temp Silicone Gasket Seal (≤250°C) supports use near drying tunnels, heat-assisted washing lines, and warm-air blow-off stations.
Technical Parameters
Specification Table:
Parameter | Specification |
Model | C-A Winged Strong Air Knife (Chinese model: C-A Dai Chi Bang Qiang Feng Dao) |
Cross-Section Size | 50W × 100H mm |
Main Material | Aluminium Alloy |
Air Inlet Position | End (Both Sides), Side (M8), Bottom (M8) |
Air Inlet Size | Φ32 / Φ38 / Φ45 / Φ51 |
Inlet Thread | M8 — visible on side and bottom inlet drawings |
Air Knife Edge Size | 0.2 – 4.0 mm (Adjustable) |
Customizable Length | 50 – 4000 mm |
End Sealing | High-Temp Silicone Gasket Seal (≤250°C) |
OEM / ODM | Supported |
Factory Capability · Customization · Service
• QXY processes the 50W × 100H mm aluminum alloy air knife body, winged outlet section, inlet ports, edge parts, and sealing surfaces with in-house CNC machining for controlled dimensional accuracy.
• Custom blade length is supported from 50 – 4000 mm. The air knife can be matched to conveyor width, product width, or equipment frame space.
• Configuration options include inlet position, inlet pipe diameter, air gap range, mounting method, and surface finish. End, side, and bottom inlet layouts can be selected according to pipe routing.
• OEM and ODM orders are accepted. Customers may provide drawings, samples, machine photos, or written application conditions for engineering confirmation.
• High-Temp Silicone Gasket Seal (≤250°C) is fitted as the standard end sealing solution, helping reduce leakage without requiring an extra sealing upgrade.
• Before shipment, each customized unit is checked by pressure test, edge-gap calibration, inlet-position inspection, and dimensional confirmation.
Competitive Advantage
Comparison Item | QXY C-A Winged Strong Air Knife | Standard Air Knife |
Winged Outlet Profile | Guide-wing outlet helps control airflow direction and installation reference | Flat outlet with less directional guidance |
Air Gap Adjustability | Adjustable 0.2–4mm ✓ | Fixed, not adjustable ✗ |
Inlet Positions | End, side, and bottom inlet layouts for flexible pipe routing | Usually one inlet layout or limited pipe direction |
Inlet Pipe Options | Φ32 / Φ38 / Φ45 / Φ51 for different blower pipe sizes | Fewer inlet diameter options |
Custom Length | Factory-customized 50 – 4000 mm for narrow or wide conveyor widths | Mostly standard lengths only |
Body Cross-Section | 50W × 100H mm body balances airflow capacity and installation size | General body profile may not match the machine space |
High-Temp Sealing | Silicone gasket ≤250°C ✓ | Standard rubber seal ✗ |
Customization | Length, gap, inlet position, inlet diameter, and surface finish can be specified | Limited configuration changes |
About Us & Custom Inquiry
Shenzhen Qixingyuan Machinery Equipment Co., Ltd.
We are a professional manufacturer focused on industrial air knife equipment, including aluminum alloy, stainless steel, and PVC air knives. Our product range also covers blowers, mounting hardware, and system accessories. With CNC precision machining, in-process quality controls, and verification before shipment, we supply air knife products for real production-line requirements.
We support OEM and ODM projects for electronics, automotive, food and beverage, pharmaceutical, and general manufacturing customers. Customers may send drawings, samples, application descriptions, or equipment photos. Our engineering team reviews airflow direction, installation space, and pipe routing, then provides a solution that integrates and performs as required.
Request a Custom Quote
We support customized air knife length, air gap, and airflow design according to your equipment requirements.
Shenzhen Qixingyuan Machinery Equipment Co., LTD.
info@airknifecn.com
Building 8, Wanfeng Third Industrial Zone, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China
