Working characteristics of metal plate cooling air knife:

Working characteristics of metal plate cooling air knife:

1. Wind tunnel effect is caused by high speed wind blowing into the wind trough, which enhances and maintains high wind speed and makes water more easily blown away.

2. The air groove can be equipped with top/neck and bottom blowing functions, so that the drying can be completed at one time, and the bottle cap is difficult to dry.

3. The air trough can adjust the device conveniently according to the diameter and height of the bottle/tank, so that the efficiency is better and the adjustment is easier.

4.the use of (in line with food hygiene requirements of the material) 304 stainless steel style tank and a number of other accessories.

5. with drainage and discharge (wet) air port, convenient water diversion and exhaust.

6. air trough (optional accessories) with sound reduction material and can cover a transparent sound reduction cover (optional accessories), both convenient monitoring and can reduce noise, kill two birds with one stone.

7. there are many types and specifications for round bottles, round cans, square bottles, square cans, large bottles, small bottles and condensing bottles for drying.

Metal plate cooling air knife device is a new type of gas source, choose high strength, fatigue resistance, high quality aluminum alloy material as the main material, it has compact structure, small volume light weight characteristics of vortex pump adopts motor straight association-like, don't need any variable speed institutions, due to its simple structure, direct drive form, so also has low noise, energy consumption province, stable performance, Convenient maintenance and other advantages, and the gas sent out without water, oil, low temperature rise, which is not comparable to other gas source equipment.

The specific application is as follows:

1. printing (inkjet) : inkjet, pre printing dust, debris, water vapor blowing, or used in ink fast drying.

2. Beverage canning and bottling: before labeling, inkjet or packaging, the bottle mouth or bottle body moisture and attachment shall be blown off.

3. electronic industry: electronic circuit board before assembly quickly dry.

4. food and medicine: before manufacturing or packaging, the water and attachments will be blown off, or bagging before opening and bag dust.

5. rubber and plastic industry: blowing off dust or debris on the surface of the product. Dry before extrusion or injection. The product is cooled after injection forming.

6. metal industry: blowing coolant or other liquid from the metal surface. Dry or cool the surface before polishing, electroplating and painting.